 |
A tool for diagnosing network and monitoring network connections. Displays all your computer's inbound and outbound connections and lists all open ports, much like the standard Windows netstat command-line utility, but in graphical interface, with protocol statistics, network properties of the local computer. Helps to detect host's activity. It includes the following tools:
* Netstat displays list of network connections, including the information on open TCP and UDP ports, IP address, and connection states. Also it displays protocol statistics.
* Ping helps to detect computer's or host's activity.
* Tracer allows you to know what hops are being used to route a packet of data from your computer to the end point.
* Route retrieves the interface-to-IP address mapping table and the IP routing table. The IP routing table is allow system to detect what IP interface will be used to process request or datagram.
* ARP displays the IP-to-physical address mapping table.
netstat ping tracert traceroute arp ipconfig ifconfig route system utilities network
|
 |
The program is used for conversation in a local network. The voice packages are transmitted in a format GSM6.10. Voice packages and service information use one and the same UDP port: 4444. The program works without Server. The ContactList traces if the client is online or offline in a network. Mixer allows to control sensitivity of a microphone and loudness of speaker. Simultaneous work with 5 clients. The sound card should be duplex. The program is distributed with the source code.
p2p network gsm610 rtcp codec freeware software application info information developer
|
 |
Easy Service Monitor is a network fault management tool that continuously monitors network devices and services. If something went wrong, it will alert you by email/phone/pager BEFORE problems get seriously out of hand. A detailed log file will record every event of the monitored targets and can be displayed in an easy to understand chart. You can configure the system so that when something goes wrong, a set of actions, such as execute a program, reboot server or update web page, will be triggered. Key features:
* Web services: HTTP and HTTPs
* FTP sites monitoring
* Database Servers: Oracle, SQL, MySQL
* Email servers: POP3, SMTP, and IMAP4
* Telnet Server
* Other TCP Services such as NNTP
* UDP Services such as Domain Name Service
* Windows 2000/NT services
* Monitoring of any network device with an IP address using PING (ICMP) or TCP Ports
* Monitoring Servers, Workstations, PC and other devices Status: Free Disk Space, Memory Usage, CPU Usage and Performance Monitor metric
* Allow you to customize the software for additional services monitoring
server service level agreement sla network monitor network applications network availability network troubleshooting fault management network management network performance easy
|
 |
- Want to know who is or better owns an ip address?
- Find the owner of foreign and domestic domains.
- Search for interesting free domains in another country.
- Get acoustic signals when a line breaks down / is up.
- Figure out why you can not reach a specific domain.
- Solve internet problems without leaving your desk.
- New: Report printing
Iban supports the most important internet protocols and techniques like dns, http, icmp, ping, smtp, sntp, tracert, whois. It comes with a secure chat module for your LAN communication. The integrated reports help solving problems. It is a great time-saver for system admins, and helps trainees to understand the basics.
Unique Features
Find IP/Domain Owners: Iban's speciality is to find the owner of ip addresses or domain names. It automatically selects the service to ask.
Check email address: Want to know right away why an email does not arrive the recipient? The recipient's mail server will tell you.
Test Server Apps: Iban can cheat a server app and "simulate" different browsers or operation systems for server scripts.
Firewall/Proxy: Iban supports the common socks4 and socks5 protocols. You can set ports, provide user name and password.
DNS: Supports 24 query types. Ideal for analyzing DNS problems. You will find out why a domain is not registered or not yet visible. Ideal to test own DNS servers.
Chat Secure: Iban's Agent let you chat with your LAN. And as a plus you can attach Iban's report to help to solve other PC's internet problems.
Acoustic Ping: You may not touch it for months, but when your line is down ones you will love to hear this sound when it is up again. Also ideal to figure out of servers or other computers are reachable.
TraceRt: Whenever a line breaks or a domain is not reachable you will know where the knot in the network is.
Internet Settings: A convenient report of all network and internet settings for all installed network adapters. Lists all open ports with the apps which use them.
internet analyzing whois ip domain http dns sntp smtp icmp querytime
|
 |
The karalon screen saver provides users with a real-time graphical display showing what their PC is doing during idle time including system activity and availability, active processes and performance information.
Real-time displays show the following information, packet decode graph together with IP address and port details, active process matrix displaying applications and services running, inbound and outbound packet matrix show who you connect to and who connects to you, TCP and UDP socket status, available drive space status including mapped drives, current IP address, packets received and dropped by your network adapter, computer name, operating system running and date and time clock.
Real-time gauges display current packets per second being transmitted, % CPU used, number of established connections, number of active processes and % available physical and virtual memory. The background is a choice of two real-time revolving pictures of Earth from space displaying major cities and local times.
Display duration, options selected, colour settings, cities and background image can be customized to a users preference.
karalon utility system maintenance screensaver saver audit status see pc idle
|
 |
ipPulse is a Remote Status Monitoring Tool. Use ipPulse to monitor the up/down status of IP connected devices (nodes) on any IP connected network. ipPulse uses a variety of methods,
including ping, tcp connects, and SNMP to poll and check the network connectivity of a list of user-defined nodes. ipPulse alerts you to failures using a variety of techniques ranging
from audible messages to email and pager notification.
Supports a large list of target hosts entered as either hostnames or IP addresses. The list can be imported from a text file.
Polls the list on a cyclical basis with full control over the list cycle timing parameters.
Supports a primary and secondary test.
Supports standard Ping ICMP Echo Requests/Replies and automatically uses UDP High Port Ping under Winsock 2 for failed contacts. Primary test only.
TCP Port numbers for TCP connect tests are assignable on a per-node basis. Primary or secondary test.
Optionally uses SNMP v1 as a secondary test by requesting MIB2 OID interfaces.ifTable.ifEntry.ifOperStatus for every interface found on the target node. Community names are assignable on a per-node basis.
Optional SNMP queries can be made for obtaining more extensive data from the target host. ipPulse includes a number of OID presets and 8 user defined OIDs. Example: you can obtain MAC addresses for every interface from an SNMP enabled host.
Multiple alerts and logging. Alert options include beeping your computer, playing a wave file, notifying someone by email, or paging someone using either standard numeric or TAP compatible alphanumeric pagers. Logging options include logging all test results to a text file, logging only errors to a text file, or logging errors to a dynamically created HTML page. Any combination of logging options can be used. Alerts are issued upon failures using user-defined criteria. Changes from a FAIL state to a PASS state can now generate email messages or pager messages.
monitor ping tcp network pager log notify status monitor network devices
|
 |
Socket Workbench is the definitive tool for analysing socket communications that underlie the Internet and several types of inter-process communication. Configure Socket Workbench to be a socket client (like a web browser or e-mail client) or a socket server with ease. You can send data through a socket and analyse that data that has been received. Also, Socket Workbench has the unique "Pass Through Mode" which allows the interception of socket communications between a client and its server without packet sniffing. Features include:
- Allows the analysis of the E-mail, HTTP, Time Of Day, FTP and any other socket based communication protocol including real-time and client-server applications.
- Configure Socket Workbench to be a socket client or a socket server.
- Allows any number of clients to connect while in Server mode.
- Intercept and analyse socket communications using the Pass-Through mode.
- Includes a library of the well-known socket port numbers and servers.
- Author and send e-mails using the e-mail protocol template.
- Contains a library of HTTP requests from the popular Web Browsers and the HTTP Responses from Web Servers.
- Ideal for testing and monitoring real-time applications or two/three/n-tier client-server applications.
- All socket state transitions and Socket Workbench events can be logged.
- Data can be analysed using a raw, binary, octal, decimal or hexadecimal format.
- Incoming and outgoing data can be logged with an optional time stamp.
- Contains 7 pre-defined configurations to get under way as soon as possible.
- Incoming data can be filtered.
- Schedule data to be sent at regular intervals.
- Data can be split in to messages and messages can be split into fields.
- Allows the stress testing of socket client and servers.
- Data sent through the socket can be "linked" to a file. When the contents of the file changes, the data is automatically re-read and transmitted.
sockets socket workbench udp socket tcp udp sockets tcp sockets packet sniffing socket protocols packet sniffer protocol analyzer
|
 |
@TheOffice provides Remote Access by letting you virtually plug into your Office Network from anwhere in the world. It uses industry-standard and provenly secure IPSec technology to establish connections from Client PCs on the road to a Gateway PC on your office LAN. Upon connection, you are assigned a virtual IP address that's on your Office Network. You are then 'plugged in' and can transparently access all your office resources as if you were '@TheOffice'.
Seamless integration with your Windows Domain greatly simplifies user management. This means your existing Domain Users will have access the instant you've completed the Gateway's configuration!
@TheOffice works over normal dialup modems, ISDN, WiFi, ADSL, Satellite, GPRS, etc. Any PC or Notebook that can access the Internet is a potential @TheOffice client.
At the core of @TheOffice lies a selection uncompromising security technologies such as Certificate-based Authentication, SSL/IPSec over UDP tunneling, 3DES/AES encryption, encrypted Private Key storage and automatic dynamic firewalling. We see absolute security as a basic requirement to any Remote Access solution, not a feature.
Despite the technical sophistication of @TheOffice, we have gone to great lengths to ensure that you will find the software a breeze to install and configure without any specialized IT skills. This, together with a flexible subscription-based licensing model, makes @TheOffice a truly affordable Remote Access solution for small- to medium-sized companies.
Try out @TheOffice for free for 30 days to decide if it's for you!
remote access secure ipsec connect office lan employees plug office network anywhere
|
|
|
