 |
MeshWorks for Rhino is a plug-in for Rhino. It adds a variety of mesh manipulation commands to Rhino. Some of the useful commands are given below:
Hollow: This command hollows the mesh to a given wall thickness. Hollowing is particularly useful while preparing a model for Rapid Prototyping as it saves material, time and money while building a prototype.
Offset: This command offsets a mesh to either shrink or expand it.
PointsToMesh: This command creates a mesh from a set of points.
Stitch: This command knits loosely tied faces of a mesh and attempts to make a mesh water-tight.
FillHoles: This command adds faces to an existing mesh in order to fill any holes. The result is a water-tight mesh.
ExtractSolid: This command extracts a solid from a mesh.
ExtractPlanarSurfaces: This command extracts a planar trimmed NURBS surface from a mesh.
ExtractShells: This command extracts connected surfaces from a single mesh and creates a new mesh for each connected surface. This is useful while working on different parts of a mesh.
ExtractSurfaces: This command extracts surfaces of a mesh and creates a new mesh for each surface.
ExtractFeatures: This command extracts features of a mesh. This is useful to create a NURBS model from a polygon mesh.
ExtractBoundaries: This command extracts the boundaries of an open mesh.
SplitMesh: This command splits a mesh with a planar surface into two parts.
Smoothen: This command relaxes a mesh by removing sharp edges.
Decimate: This command reduces the number of faces of a mesh while maintaining continuity in the topology.
MeshWorks for Rhino adds a new menu to the existing Rhino menu containing all the added commands. Simply use this menu to manipulate meshes.
meshworks mesh works meshes manipulation plug-in add-in rhino utility utilities rapid
|
 |
NC Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to convert tool movements in NC commands to corresponding lines and arcs in a SolidWorks 3D sketch.
CNC Machines worldwide use Numeric Control files (.nc or .ncc) to convert programmed instructions to tool movement. NC programs consist of a sequence of codes with parameter data to arrive at a precise description of the toolpath. But the best of NC programmers also can make mistakes. NC Import for SolidWorks lets you import NC files into SolidWorks so that you can view the intended toolpath in 3D and create curves and surfaces directly from the toolpath.
NC Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import a NC file select Open from the File menu. Select "Numeric Control Files (*.nc)" from the "File of type" combo box and select a NC file to import. A new part document will be created containing the imported NC file.
You can download NC Import for SolidWorks by clicking on the link below. NC Import for SolidWorks will work in demo mode till you register it. The cost to register is USD 200.
nc import for solidworks nc import nc import importing import nc open nc file drawing solidworks plug-in
|
 |
OBJ Export for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to export graphical data to ASCII Alias|Wavefront OBJ files.
Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications.
OBJ Export for SolidWorks tessellates the surfaces of a part and writes the triangular surfaces of the part to an OBJ file.
OBJ Export for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Save As dialog box. To export an OBJ file select Save As from the File menu. Select "Wavefront Files (*.obj)" from the "Files of type" combo box and select an OBJ file to export.
obj export for solidworks obj export obj export exporter export obj save obj save as obj file plug-in add-in
|
 |
OBJ Import for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to import graphical data from ASCII Alias|Wavefront OBJ files.
Alias|Wavefront is the world's leading innovator of 2D/3D graphics technology for the film, video, games, interactive media, industrial design, automotive industry and visualization markets. Their OBJ ASCII file format is widely accepted the world over for exchanging graphical data between drafting applications.
OBJ files contain solids which are made up of 3 or 4 sided faces. OBJ Import for SolidWorks reads these surfaces and knits them into a solid in a new SolidWorks part document. If the attempt to knit the surfaces into a solid succeeds, the solid appears as the base feature (named Imported1). If the surfaces represent multiple closed volumes, then one part is made for each closed volume. If the attempt to knit the surfaces fails, the surfaces are grouped into one or more surface features (named Surface-Imported1, 2, ...).
OBJ Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import an OBJ file select Open from the File menu. Select "Wavefront Files (*.obj)" from the "Files of type" combo box and select an OBJ file to import. A new part document will be created containing the imported OBJ file.
obj import for solidworks obj import obj import importer import obj open obj open file plug-in add-in
|
 |
STL Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to import graphical data from ASCII as well as binary Stereolithography (STL) files.
The STL file format has become the Rapid Prototyping industry's standard data transmission format and is the format required to interact with stereolithography machines. This format approximates the surfaces of a solid model with triangles.
Stereolithography files contain solids which are made up of 3 sided facets. STL Import for SolidWorks reads these triangular surfaces and knits them into a solid in a new SolidWorks part document. If the attempt to knit the surfaces into a solid succeeds, the solid appears as the base feature (named Imported1). If the surfaces represent multiple closed volumes, then one part is made for each closed volume. If the attempt to knit the surfaces fails, the surfaces are grouped into one or more surface features (named Surface-Imported1, 2, ...).
STL Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import a STL file select Open from the File menu. Select "Stereolithography Files (*.stl)" from the "File of type" combo box and select a STL file to import. A new part document will be created containing the imported STL file.
stl import for solidworks stl import stl import importing solidworks import stl stl file open stl file plug-in
|
 |
STL Import for Surfcam is a STL file import plug-in for Surfcam. STL Import for Surfcam gives Surfcam the ability to import geometric data from ASCII as well as binary Stereolithography (STL) files.
The STL file format is the Rapid Prototyping industry's standard data transmission format and is the format required to interact with stereolithography machines. Stereolithography files contain solids which are made up of 3 sided facets. STL Import for Surfcam converts these facets into surfaces or line meshes and adds it to the contents of the currently opened Surfcam drawing.
STL Import for Surfcam is very easy to use. This plug-in adds a new file type to the Surfcam File Open dialog box. Simply select a STL file to import.
stl import for surfcam stl import import stl stl stl import importing surfcam file stl file import stl file
|
 |
Data: Import data series from database (MS Access) table, text file, copy/paste from spreadsheet (MS Excel). Operate with more then one data series at the same time. Virtually unlimited number of records to present and analyze. Automatically recognize calendar mm/dd/yyyy data format transferring it into yyyy.yyyy to use for market (currencies, shares, commodities) time trend analyzation. Data presentation and statistical analysis: Histograms of variables distribution and comparison with Student and Poisson curves.X-Y chart of two variable dependence and curve fitting with least square method (variety of user interfaces to chose from), signals revealing and user defined formula. Automatically best polynomial and Fourie approximation. Three dimensional in perspective projection presentation of variable as function of two arguments and distribution of two variables. Color map style presentation of function of two arguments and distribution of two variables. Quasi plane and parabolic least square approximation in multidimensional space of arguments (including case of two arguments where the fitting surfaces are visualized. Nearest neighbors method of estimation value in multidimensional space. A matrix of correlation coefficients of active variables. Results: Data and main statistical results is displayed on the screen in report-ready form. Statistical formulas and coefficients are shown in result panel. User has ability to copy/paste screen chart as a bitmap picture into MS Office applications as well a content of result panel in form of a table. There is an option to instantly create a MS Word document with a picture and results reflected to the content of chart screen and content result control. Interface: Transparent and self-explanatory user interface conveniently located at control panel of application. At any moment a user via at most three clicks is able to reach any control to edit a statistical schemes or presentation options.
distribution approximation curve fitting least square near neighbors statistic software statistical analysis experimental data
|
 |
n-Surf is a new generation of software for analyzing and processing of images of surfaces obtained by Scanning Probe or Atomic Force Microscopes (SPM/AFMs). This application was developed for high-quality visualization and easy processing of all types of images. To date, support for Veeco/DI (NanoScope III, NanoScope IV), NT-MDT (.mdt) and MPRI (NANOTOP-205) files has been implemented.
Owing to the virtual main frame and other unique features, multidocument interface allows to work easily and concurrently with a variety of images.
You will enjoy freedom in manipulating different views of your document in the n - Surf environment.
This application uses all modern facilities of Windows 2000/XP, such as Thumbnails, Clipboard, Float toolbars, Contexts Help and others.
Superior printing quality will fit every user's requirements.
The basic concept of n-Surf is presentation of all images in the form of three views, namely, 2D, Bump and 3D, each having strengths and weaknesses. However, you have freedom in choosing the most workable one to solve your specific problems.
Researchers can use a lot of facilities and processing methods offered:
1.Variety of filters such as Arithmetic mean, Median, Laplacian, Gaussian, High-pass, Low-pass, Sharpening, Prewitt, Scharr, Sobel, Roberts and others.
2.Dilate and Erode morphological operations.
3.Fourier transform and Autocorrelation.
4.Roughness analysis, Height histogram and Bearing curve.
5.Profiles.
6.Special operations such as Jump elimination, Flatting and Plane fitting.
This list is by no means complete and will undergo replenishment in the future. At present n-Surf is constantly under development. Therefore there is always a room to implement specific suggestions of its customers.
n-surf image processor n-surf free software nanotechnology nano technology spm scanning probe microscope afm atomic force microscope image processing
|
 |
Fly-through 3D graph software for exciting presentations, marketing, sales, analysis and fun! Capture the attention of your audience with spectacular 3D technology. Instead of showing your audience another boring line graph, capture their interest with something wildly different. They will be more likely to talk about and remember your presentation that had something that stood out from the crowd. It makes your company appear as forward thinkers and that your products are just as advanced.
Features:
- Stunning 3D environment that maintains interest
- Orbit and fly-through viewing controls
- Utilises the power of Microsoft DirectX
- Full screen for maximum visibility
- Texture mapped surfaces for superior visual quality
- Dynamic lighting (producing a dramatic effect)
- Handy translucent height guide
- Plays your favourite mp3 sound file
- Fully documented help file
- Easy and fun to use
- Customisable level of detail
- More useful and informative than a 2D graph
3d graph 3d graph presentation marketing sales analysis free computer software download
|
|
|
