 |
The MZL & Novatech Traffic Statistics Linux Server is intended to run in servers in intranet or on a gateway and allows to view the Linux servers network usage information on Windows workstations as HTML reports. It reads IP packet from libpcap and allows users of the free Windows client to see the amount of bandwidth consumed as an icon in the system tray.
The user is able to see which hosts, services or ports were the top traffic consumers. MZL & Novatech TrafficStatistic works on IP packet level, therefore the user gets reports on all the traffic, regardless wether this traffic was made by a browser, a filesharing software or a secure connection. It contains an editor for specification of local addresses and ports to be captured or not captured. This allows to capture traffic to a proxy or VPN but exclude the rest of local traffic.
MZL & Novatech TrafficStatistic can be useful for many diffrent people:
- broadband (like DSL or cable) users with a volume metered (bandwidth limited) charge plan have always an eye on the currently accumulated consumed traffic.
- internet users with a flatrate can see whether a cheaper metered charge plan might be appropriate for their consumption habbits
- internet users are able to see, which services cause the most traffic
- internet users are able to see, how much traffic was consumed with their top target hosts
- operators of dedicated servers in a bandwidth metered charge plan get up-to-date statistics
- network operators can see bandwidth consumption cut by host and service of all machines in the local net
MZL & Novatech TrafficStatistic contains an IP detail record (IPDR) generator developed on basis of ACE. MZL & Novatech TrafficStatistic has be installed with administrator privilegues.
It is distributed as binaries for Linux with lib_c like Redhat 9, Suse 9 or Debian Sarge. The Traffic Statistics Windows client is needed to configure the Linux Server.
bandwidth monitoring bandwidth usage statistics traffic statistics internet online ip ipdr ip data collector broadband volume
|
 |
Network Spy is a general purpose diagnostic tool for administrators,
programmers and students of network technologies. It can operate in
different modes depending on the application. Some of the more typical
applications of this tool include:
- Packet capture and decode
- Network Statistics gathering
- Software debugging
- Intrusion Detection and activity monitoring
Packet Capture and Decode
In this mode, Network Spy can be used to get a snapshot of data from an
ethernet network. It is capable of decoding the most widely used IP
protocols such as UCP, TCP and ICMP. It also allows you to save this data
for later analysis. The decoded packets are displayed in human readable
form.
Network Statistics gathering
In this mode, the amount of data attributed to a certain activity can be
captured. For instance, if you want to monitor how much data is
transferred between user x and excite.com, you can specify a rule to keep
a track of amount of this data. Another example is keeping track of how
much FTP data flows on your network.
Software Debugging
People programming network software and web applications will find this
tool extremely useful. It can be used to debug application to find errors
in code, compute bandwidth utilization and find bottlenecks.
Intrusion Detection and Activity Monitoring
Using the new rules-based filtering mechanism, one can capture packets of
interest, avoiding a huge capture of all packets on the network. A rule
specifies a pattern to match. For instance, one could specify to capture
all ICMP packets where TTL=1. This would be true when someone is
performing a traceroute.
Network Spy also includes various other tools such as DNS Lookup, Ping, TraceRoute and Whois to aid in everyday tasks.
internet networks ethernet sniffer packet capture intrusion detection bandwidth traceroute ping ip
|
 |
ModemTest is an easy to use Windows based application that allows users to test their dial up modem. ModemTest performs low level testing that is independent of your Internet Service Provider (ISP) and the TCP/IP settings on the computer. It allows the modem to be tested in addition to the phone line the modem is connected to. ModemTest provides a method for system integrators and computer repair centers to test both internal and external modems. By a process of elimination, home users can also use the ModemTest to help isolate Internet connection problems to a faulty modem, or phone line or their ISP service. ModemTest logs any data corruption and incorporates a modem speed test which reports the initial connection speed and the actual throughput.
Two different test methods are provided. The first test method uses two telephone lines and two modems in a master / slave configuration. The master dials the phone number of the slave modem and after a successful connection, data packets are exchanged between the master and slave. The second test method requires only a single modem and no telephone line. A local loop back is done on the analog side of the modem, ModemTest then sends data packets which are echoed back by the modem. In both cases ModemTest communicates to the modem using a COM port. (In the case of Internal modems or USB modems, this is a virtual COM port and not a physical plug on the machine).
Modem Test allows the sending of specific data files allowing compliance to specific standards, for instance ITU-T v.56.
Before sending any data, ModemTest first checks the settings on the serial port and then on the modem itself. Any data received is verified to be sure that it is complete and without errors. A log of the activity is kept in the right hand section of the window. Different types of activities are highlighted in different colors. Any errors are displayed in red. This log can be saved to disk if required.
modem loop back loopback connection speed bandwidth internet test dialup bandwidth
|
 |
RealSPEED is a program empowering and speed up your internet connection sharply. It is optimizing the unknown settings and the registry of your operating system. Supports most of the connection types like Modem, Cable, ISDN, xDSL, Satellite, etc. and also most of the programs like NeoPlanet, Opera, AOL, PcAnyWhere, etc. This program enables you to send and receive bigger information packets for your protocol safely and by means of a Stay-Alive Tool attached to this program, your connection will never drop in any case. Update Tool lets your product keeps up to date with downloading patches and new optimization types.
realspeed optimize modem speed registry cable dsl satellite modem cable direcpc
|
 |
AtomicLog2 makes it easy to monitor and control your Internet activity. Whether you're using Internet Explorer, Netscape Navigator, AOL, or any Internet-enabled program, AtomicLog monitors all of your computer's web site visits, e-mail that is sent and received, file transfers, chatroom sessions, videoconferencing, and all web activity. The program's easy-to-use graphical interface lets you merge historical and real-time usage to easily view how your computer is being used online. AtomicLog also stops spyware, filters out unacceptable web sites, and blocks annoying advertisements.
You can sort AtomicLog's charts by hits, unique host, or amount of data sent and received. It's easy to filter the information by desktop application, Internet service, host, domain, country, or amount of traffic. You can quickly change the time frame for any of AtomicLog's easy-to-read charts. By drilling down into the charts, you can analyze the data in more detail, giving you insights into the Internet packets sent and received from your desktop.
In addition, AtomicLog examines the huge log files produced by your web server, and lets you see the top referring web sites, the most popular visiting domains and countries, the documents and files that your visitors are downloading, and your traffic levels by hour, day, or month. This information is great for understanding the success of your advertising, affiliate programs, and search engine placement.
AtomicLog's unique database structure lets you see both real-time and historical activity, all in easy-to-read charts and graphs. AtomicLog is simple to install, and requires no configuring. Immediately following installation, the program monitors and controls all connections from your desktop to the Internet.
internet monitor filter adwasher block dns http real-time web page site
|
 |
The most efficient and reliable password sniffer! Win Sniffer allows network administrators to capture passwords of any network user. Win Sniffer monitor incoming and outcoming network traffic and decode FTP, POP3, HTTP, ICQ, SMTP, Telnet, IMAP, NNTP passwords.
Unlike other network sniffers, Win Sniffer has advanced, integrated technology that allows it to reconstruct network traffic in a format that is simple to use and understand. While most other network sniffers merely display a list of packets traveling across a network, Win Sniffer will reconstruct each of those packets individually. Thus, capturing a clear and concise image of the integrity of an organizations entire network.
With Win Sniffer administrators can assess the danger of clear text passwords in the network and develop ways to improve sevurity.
sniffer windows password nt 95 98 2000 pop3 ftp telnet mail
|
 |
Sniff'em 1.1 is a Windows based Packet sniffer an Network analyzer, a revolutionary new network management tool designed from the ground up with ease and functionality in mind.
Windows 95,98(se),NT,2000 and XP, aswell as Dialup (RAS) support on all Operation systems
Sniff'em aids at monitoring network traffic in order to recognize and decode certain packets of interest. Sniff'em puts your Network adapter into listening mode, capturing everything that travels through the Network.
This can help you solve network bottlenecks or spot illegitimate activity like crack attacks, Spyware, and other sort of malicious, unormal Traffic.
packet sniffer network analyzer packetsniffer ethernet sniffer sniffem 1 1 windows based packet
|
|
|
