 |
Comm Operator simulates the rs232 device, such as GPS receiver, total station, and software related. It acts as a device as well as program. Using it, device can be developed without program. Application can be debugged and tested without real device.
Comm Operator can log the data to and from COM port. It can send data to port automatically with just a few simple mouse clicks.
rs232 rs 232 rs 232 com port simulation emulator serial comm operator commop op comm commlog 5d tool 5dtool pda pocket pc total station gis gps survey log
|
|
|
 |
CommLog of 5dtool is a freeware used for record and monitor the data from serial port of PocketPC. It would be useful for record data from total station, GPS and other rs232 device connected to PDA.
It is also useful for test the line of rs232 connected to PDA.
com port rs232 rs 232 rs 232 simulation emulator serial port commlog 5d tool 5dtool pda pocket pc wince windows ce total station gps survey log record windows ce test
|
|
|
 |
Serial port toolkit to enable applications or scripts to communicate with a modem or other serial port device. This ActiveX control features full com port control, binary and ASCII data transfer, support for RS 232 and RS 485 standards and ISDN modem support.
Can be used by ASP, ASP.NET, Visual Basic, Visual Basic .NET, Visual C++, Visual C# .NET or VBScript. Samples for all platforms and development tools are provided. ActiveComport can control any device that has a serial interface (com port): a printer, a modem, an ISDN modem, a USB serial device, a network device, a computer, a weight indicator, a scanner, etc., and can be used on Windows 98, Windows NT, Windows 2000, Windows XP and Windows .NET platforms.
Visit http://www.activexperts.com/activcomport to view online samples.
serial port serial port modem modems com comport com port asynchronous rs-232 rs-485 script scripts tool tools asp vbscript activex visual basic
|
 |
Look RS232 is a tool for debugging computer connection with peripheral devices using COM port, such as modem, mini-ATS, projector etc. Its easy to use interface guarantees an easy work with Com-port. Look RS232 can send data through COM port, receive data from an outer device through COM port, it has port indication as well. Look RS-232 supports connection at the standard speed of 110?115200 kbit/s, it supports commands of COM port program control. Look RS-232 supports data input in ASCII, BIN, HEX, OCT formats, keeps log of the sent and received data and commands in ASCII, BIN, HEX, OCT formats, it has an option of time link (relating to COM port activation). Look RS-232 works with system initiated COM ports regardless of whether they are installed on motherboard or on supplementary in/output boards, e.g. VS-Com (Roadrunner) PCI-800H 8-port PCI.
rs232 rs 232 com port serial port monitor debug serial data transfer external device transfer look rs232 monitor debugging serial data transfers between devices
|
 |
Docklight Scripting gives you both, flexibility and simplicity. Within minutes you can build your own automated testing tools and create
* Repeated test cycles (e.g. endurance testing for a motion control / drive system).
* Time-controlled test jobs (e.g. sending a diagnostics command at certain times of day).
* Automatic device configuration scripts (e.g. resetting a RS232 device to factory defaults before delivery).
* Fault analysis tools for service and maintenance tasks (e.g. running a set of diagnostics commands and performing automatic fault analysis).
* Protocol testers with automatic checksum calculations (e.g. CRC - Cyclic Redundancy Codes).
* Docklight startup scripts (e.g. automatically starting a COM port logging task at PC startup).
Docklight Scripting uses the VBScript engine, allowing you to write your tests in a simple and well-known script language. Docklight's basic functions and features are made available through a small and convenient set of script commands. The sample applications and scripts provided make getting started easy, and allow you to become productive immediately.
rs232 automated testing automatic testing rs232 rs-232 rs 232 crc checksum script scripting diagnostics configuration batch debugging automated automatic test program device testing drive control motion control sps endurance testing fault analysis
|
 |
Simple RS 232 monitor is a small diagnostic program used to monitor RS 232 communications between devices. Usually, one device is a computer. The software supports baud rates from 110 up to 256000 baud, and 4 data bits to 8 data bits. Captured data may be timestamped, annotated, and saved in a number of different formats. In passive capture mode, the software can determine DTE and DCE communication settings automatically. In source capture mode, the program allows the transmission of user-entered strings - this mode is ideal for diagnostic communication with modems and peripheral devices.
simple rs 232 monitor data acquisition logger small diagnostic program used monitor rs 232 communications between devices
|
 |
DataFitX is a COM component (in-process ActiveX DLL) which allows you to add a powerful nonlinear regression (curve fitting) engine to your software with just a few simple lines of code. DataFitX is developed using COM, so it can be used in any environment that supports COM, including Microsoft Visual Basic, Microsoft Visual C++, Delphi and VBA (Microsoft Excel, Microsoft Access or any VBA enabled client). A DataCollection object provides methods and procedures for importing and gathering data, as well as providing statistical summaries for the data. The NonlinearRegression and MultipleNonlinearRegression objects provide methods and procedures for defining regression models with up to 100 fitting parameters and performing nonlinear regression on data containing up to 50 independent variables. The CubicSpline object performs cubic spline interpolation on 2-dimensional data. These objects provide properties and methods that return results for the fitting parameters, as well as detailed statistical summaries of the regression results. Arrays of predicted values and residuals are automatically generated, but you can also predict values on a point by point basis (Y at a value of X), or create arrays of predicted values based on data arrays you supply. These objects also include methods to perform derivative and multiple root calculations (X values at a specified value of Y). There are more than 600 pre-defined models, but you can easily define your own by passing a string representation of a model to one of the model creation methods. You can also create event-based regression models, which allows the client code to supply the function evaluations and optionally the derivative calculations through raised events. There are ten objects with 232 methods, procedures and events. You can process the regression results in the client code, or export regression results in DataFit native file format. A DataFitX developer license includes royalty free run-time distribution.
com dll curve fitting data nonlinear parameter estimation regression statistics math science datafitx nonlinear regression curve fitting statistical analysis component
|
|
|
